faq
FAQ

Want to buy 110kw ring die feed pellet mill machine,how much? The model of the 110kw ring die feed pellet mill machine is SZLH420, its output is 8-12 tons per hour, 110kw is the main motor power, the feeder power we configure for it is 1.5kw, the conditioner power is 7.5kw, The ring die diameter is 420mm, and the final pellet diameter is 2-12mm. About the price of SZLH420 animal feed mill, it needs to be determined according to the actual pellet size, equipment material and other factors, please contact Richi Machinery for details.

If the mixer excess temperature of the gearbox,what is the problem? (1)Poor lubrication,you can replace the lubricating grease;
(2)The bearing of the speed reducer is damage,you can replace the bearing.

The ring die is broken when worn to a certain degree,what can I do? (1) Foreign material in press diePerfect the cleaning of material
(2) Ring die is too thin.;Use a thicker ring die with shoulder hole.
(3) The fixing of ring die is failureCheck whether the driving rim and the fixing bolts are locked firmly, and replace the driving rim if necessary.

Comparison Between Single And Twin Screw Fish Feed Extruder

Today, the aquafeed extrusion process is considered a high-temperature, short-time bioreactor that can transform any number of raw materials into intermediate or finished products that have high consumer appeal.  A significant application of the extrusion process to animal feeds is in the production of aquafeeds. With this application, it not only increases the digestibility of […]

Comparison Between Single And Twin Screw Fish Feed Extruder Read Post »

Nutritional requirements for laying hens from 15 weeks of age to laying period

1. Ensure that there is a reasonable calcium gradient in the diet, so as not to directly use the peak high-calcium diet to cause excessive blood calcium in laying hens, which will increase the burden on the kidneys, cause kidney swelling, and eventually lead to diarrhea; 2. An appropriate (week to two weeks) nutritional transition

Nutritional requirements for laying hens from 15 weeks of age to laying period Read Post »

What Is Biofloc Technology?

Biofloc is a system for removing waste from water. It has previously been used to treat water coming into farms. This is done to ensure that no diseases are transmitted. The technique uses a good set of bacteria. These are probiotics. These probiotics can kill harmful bacteria. To maintain water quality. They also have the

What Is Biofloc Technology? Read Post »

I am a sheep farmer. Recently, a few lambs are reluctant to walk, limp, and have bent metatarsal joints. May I ask the experts what disease is this? How to prevent it?

According to the description, it was judged to be sheep rickets. Rickets is a disease of bone deformation caused by insufficient vitamin D and calcium and phosphorus metabolism in lambs during the growth and development period. It mostly occurs in the early spring of winter. 1. Causes The disease is mainly seen in insufficient vitamin

I am a sheep farmer. Recently, a few lambs are reluctant to walk, limp, and have bent metatarsal joints. May I ask the experts what disease is this? How to prevent it? Read Post »

Can cacti be used as feed?

The succulent stems of cactus contain a large amount of comprehensive nutrients and trace elements, and are much higher than other crops. At the same time, cactus has a high yield and is easy to grow. At present, cacti have been planted all year round in some areas and used as animal feed. Use cactus

Can cacti be used as feed? Read Post »

I want to do fish farming. I heard that the location of aquaculture is very important. How should I choose a breeding site?

The selection of aquaculture farm site should mainly consider the topography, soil, water source, environment, transportation, power and other conditions. 1. The choice of terrain. It is best to choose a plot that is convenient for self-irrigation and drainage, and the ground slope is less than 2.5% to build the pond. Sites prone to flooding

I want to do fish farming. I heard that the location of aquaculture is very important. How should I choose a breeding site? Read Post »

email
whatsapp
click it!
Scroll to Top