Fast fattening method for thin sheep

1. Feed quality:

Try to choose sheep feed materials that are digestible, mildew-free, and clean and clean.

 2. Feed mix:

Coarse feed can be reasonably matched with silage corn stalks, soybean straw, peanut seedlings and green dry grass. Concentrated feed can use 60% corn, 20% soybean meal, 14% wheat bran, 4% premix, 1% salt, 1% small Soda paired together. The ratio of coarse and concentrated feed is 7:3 in the early fattening period, and gradually transitions to 5:5 in the later period.

3. Feed amount:

Sheep can consume about 2.5% to 3% of their body weight. For example, a sheep weighing 50 kilograms needs to consume 1.25 to 1.5 kilograms of feed (dry matter) per day. In the current season, you can choose to feed twice at 7:00 in the morning and 5:00 in the afternoon, and then feed again at 10 to 11 in the evening.

4. Drinking water:

Provide sufficient clean drinking water, and warm water for thin sheep if possible.

In addition to the above points, sheep farmers also need to do a good job in daily management and disease prevention. Generally, after 20 to 30 days, thin sheep can rejuvenate.

I want to open a feed mill, do you provide turnkey service?...[ 2021-04-27]
We have the interest to be a distributor for these biomass fuel pellet mill machine produc...[ 2021-04-19]
Our Company is located in Ukraine. The mainly biomass materials in Ukraine is reed, straw ...[ 2021-04-18]
What are the wearing parts of ring die wood pellet maker machine?...[ 2021-04-17]
What's the meaning of GJ? What's the calorific value of wood pellets?...[ 2021-04-16]

How to build a complete animal feed pellet production line

Wood Sawdust Making Machine, Wood Chips Crushing Machine

Animal Feed Mill Plant, 10TPH Feed Production Line 3D Modeling

Turn-key Poultry Feed Pellet Production Line

How to setup a complete fish feed pellet production line


Please send your requirements, RICHI's consultants will get back to you quickly.

Please specify your requirement by referring to the following aspects,RICHI's consultants will get back to you quickly :

  1. 1What capacity will meet your demand? (Key point)
  2. 2What kind of raw material and expected final product are you planning to have? (Right solution begins from material and product)
  3. 3When is the project supposed to be running? (Key info for A-Z project programming)
  4. 4Budget for machinery purchasing? (Key infomation for right model)
  5. 5Points that you really focus on. (Customized service from our project consultant)
Get Quote