The floating fish feed pellet mill machine is stopped during working,confirm whether the following problems: (1)The tension of the V-belt is not enough which makes the speed controller act on; Readjust the tension of the V-belt or check the pressure value on the pressure gauge of hydraulic system, reset the pressure value if necessary(Take care […]

If your fish extruder machine has a poor product forming, you need to do these things: (1)Raw material formula is impropriety; Change the Raw material formula; (2)Processing temperature is too high or too low;Reassemble the parts in the cylinder; (3)Material feeding is not uniform;Adjust until uniform feeding; (4)The moisture content is too high or too

(1) The timing belt of feed pellet mill is offset.Readjust the timing belt. (2) The timing belt is too tight or too loose.Readjust the timing belt. (3) Timming belt polluted by grease or dirt.Clean grease or dust, and take prevention measures. (4)The timing belt provided by undesignated factory.Use the timing belt provided by designated factory.

The functions of feed pellet making machine tempering are as followed: 1) The conditioner adjusts the degree of gelatinization of the starch under the action of hydrothermal, which is beneficial to the absorption of the animal; at the same time, the protein is denatured by heat, and the denatured protein is easily digested, thereby improving

1) Too small thickness of the ring die, causing the bad strength. 2) Ring die is inserted with hard matter during the running (such as the metal objects such as bearing balls falling in the feed pellet mill chamber). 3) Too small interval between the rollers. 4) The ring die clamping surface is seriously worn,

The quality problems of the wood pellet machine ring die generally have the following reasons: 1) The fixing bolt is too short; the bolt quality problem and material (grade 8.8). 2) Fixed shackle is too long. 3) Dirt contained in the plug hole; ring die drive rim or hoop wear. 4) New and old ring

(1) After soaking the die holes with oil, slowly press in with the compound feed to observe the discharge. (2)Slowly feed the whole corn or fractured corn to observe the discharge. (3)Whole corn, oil, and fine sand are mixed and fed to observe the discharge. (4)Use a power drill to drill the filler (improper handling

How to use different raw materials to make biomass pellets?Biomass pellets are made from various raw materials like saw dust, wood shaving, wood chips, alfalfa, straw, peanut shell, bagasse, bamboo, grass, rice husk, waste paper, etc. When the raw material biomass is fed into the wood pellet mill making machine, it goes down between the

The density of chicken feed pellets is closely related to the size of pellets. The feed pellets of each chicken feed factory are not exactly the same, so the density cannot be exactly the same. The mass of a cubic chicken feed pellet is about 800 kg.

A chicken feed processing plant with an annual output of 20,000 tons, which mainly includes batching scale, poultry fodder grinder crop crusher machine, chicken feed mixer machine, batching, chicken feed pellet mill, pellet crumbler,cooler,, screening machine and packing machine,etc.

We got your inquiry that you want 20 ton/hour premix feed production line . Now i confirm with you clearly , then we can make the quotation sheet for you : 1. Do you want premix feed production line ? or poultry feed production line( mash feed and pellet feed ) ? 2. You want

If you are interested in the model SZLH250 feed pellet machine, you can check this page：https://www.richimachinery.com/product/1-2tph-feed-pellet-machine.html. In addition, please direct online consultation, you can figure out the output you need according to the tips of our technicians. Because in previous cases, many customers have mistaken the output size they need. For example, there was a