What should I do if the fish extruder machine in poor product forming?
If your fish extruder machine has a poor product forming, you need to do these things:
(1)Raw material formula is impropriety; Change the Raw material formula;
(2)Processing temperature is too high or too low;Reassemble the parts in the cylinder;
(3)Material feeding is not uniform;Adjust until uniform feeding;
(4)The moisture content is too high or too low.Reduce or increase the water adding amount or steam adding amount;
(5)The blade is worn out; Replace the blade;
(6)The size of the crushing particles is too big;Replace the sieving slice of the pulverizer and improve the crushing fineness.