faq
FAQ

What should I do if the superfine grinder is to be stopped for a period of time?

Regarding the maintenance and storage of the animal feed superfine grinder equipment:

(1) Frequently check the fastening of each part to prevent it from loosening and falling off and damaging the machine.

(2) The oil filling holes should be filled frequently, and the bearing parts should be cleaned and filled with lithium grease every six months.

(3) When the machine is stopped for operation, the machine should be idling for a period of time, and the remaining material in the machine should be blown off before shutting down.

(4) When the machine is out of service, the debris outside the machine should be removed, all rotating parts should be filled with grease, and stored in a dry air, no corrosive gas warehouse.

MORE FAQSMORE
I want to open a feed mill, do you provide turnkey service?...[ 2021-04-27]
We have the interest to be a distributor for these biomass fuel pellet mill machine produc...[ 2021-04-19]
Our Company is located in Ukraine. The mainly biomass materials in Ukraine is reed, straw ...[ 2021-04-18]
What are the wearing parts of ring die wood pellet maker machine?...[ 2021-04-17]
What's the meaning of GJ? What's the calorific value of wood pellets?...[ 2021-04-16]
INQUIRY
RICHI VIDEO

How to build a complete animal feed pellet production line

Wood Sawdust Making Machine, Wood Chips Crushing Machine

Animal Feed Mill Plant, 10TPH Feed Production Line 3D Modeling

Turn-key Poultry Feed Pellet Production Line

How to setup a complete fish feed pellet production line

×
Fill Out The Form To Get Quotation
Leave Message WhatsApp