faq
FAQ

The bearing of my corn grinding hammer mill machineis too heat.

If the bearing of corn grinding hammer mill machine too heat,confirm whether the following problems:

(1)The centers of the main shaft and motor are not concentric; Adjust it to be concentric with the main shaft.

(2)The lubricating grease is too much, too little or bad. Replace the lubricating grease and refuel it in accordance with the regulations.

(3)The bearing is damage; Replace the new bearing.

(4)The main shaft is bent and the motor is unbalance; Align the main shaft and balance the rotor.

(5)Work overload for long term; Reduce the feeding amount.

(6)The model of the selected lubricating grease is wrong;Choose the Lithium base molybdenum disulfide.

MORE FAQSMORE
I want to open a feed mill, do you provide turnkey service?...[ 2021-04-27]
We have the interest to be a distributor for these biomass fuel pellet mill machine produc...[ 2021-04-19]
Our Company is located in Ukraine. The mainly biomass materials in Ukraine is reed, straw ...[ 2021-04-18]
What are the wearing parts of ring die wood pellet maker machine?...[ 2021-04-17]
What's the meaning of GJ? What's the calorific value of wood pellets?...[ 2021-04-16]
INQUIRY
RICHI VIDEO

How to build a complete animal feed pellet production line

Wood Sawdust Making Machine, Wood Chips Crushing Machine

Animal Feed Mill Plant, 10TPH Feed Production Line 3D Modeling

Turn-key Poultry Feed Pellet Production Line

How to setup a complete fish feed pellet production line

×
Fill Out The Form To Get Quotation
Leave Message WhatsApp