Mixing can solve the problems of the normal materials generally. However, the materials with high viscosity cannot be transported by the air conveyer. Richi Machinery powder feed mixing machine for animal feed: 1.SLHY Horizontal single shaft double ribbon mixer(250KG/BATCH) 2.SLHJ single-shaft 500kg/batch animal feed mixer(500KG/BATCH) 3.SLHSJ Animal Feed Double Shaft Mixer(500KG/BATCH) 4.SLHJ Stainless Steel Feed […]

FDF 125 A Pelletizer Machine For Animal Feeds,is a kind of flat die feed pellet machine,but its power is 3kw,pellet size is Φ2.0-Φ6.0mm,its capacity is 80-100kg/h,its price is less than 1,000 dollars.Please contact Richi Machienry directly,and our sales staff will send you the video , pictures and quotation about our machiney for your reference.

Four types of aquatic feed extruder can meet your needs : (1)Floating fish feed extruder machine,capacity : 2t/h,main power: 132kw (2)DSP fish feed pellet extruder,capacity 3-4t/h,main power: 132kw (3)Wet type fish fodder mill extruder,capacity : 1-1.2t/h,main power: 75kw (4)Dry Type Fish Feed Extruder Machine For Sale,capacity : 0.12-0.15t/h,main power: 15kw Fish extruder machines have different output,

As a leading pellet making machine supplier from China, Richi Machienry offers a wide and complete range of animal feed pellet mills in small and large production capacity.from 80kg/hour to 15 ton per hour, as well as turn-key plant. For a turn-key poultry feed pellet plant, normally will include storage silo, poultry feed hammer mill,

Configuración de una línea de producción de piensos para pollos de engorde de 8-12 toneladas por hora，cada tonelada de producción de piensos para pollos de engorde consume unos 15 kilovatios-hora de electricidad; la cantidad de vapor necesaria para preparar los materiales por hora es de 1 tonelada; la presión general es de 4 MPa. 

For example: Pigs: Each pig needs about 300kg of feed from piglet to slaughter; Chicken: Calculated by inventory, each chicken needs 0.125kg of feed per day; Cattle: Calculated by concentrated feed, a cow is 6kg a day, 6kg*1000 cows=6000kg, and the production time is 10 hours a day, and the output is 600kg per hour.

To master the conventional standards, a small amount of concentrated feed can be put into the spring; the daily feeding amount in early summer accounts for 1% to 2% of the total weight of the fish; the feeding amount in the summer season accounts for 3% to 4% of the total weight of the fish;

1. The green feed should be fed on-the-spot, and appropriate preparation before feeding, such as washing, shredding, beating, etc., to facilitate the geese to eat and digest. The remaining green grass slurry cannot be fed to the geese to prevent nitrite poisoning. 2. When using green feed, the nutrient content and digestibility changes in different

1. The advantages of crushing first and then ingredients (1) The crushed materials are stored in the batching bin, so that the animal feed hammer mill crusher can always be in a full-load working state, and the utilization rate of the equipment is improved. In addition, the normal operation of subsequent equipment will not be

1. Check the security and reliability of the fastener parts. 2. Bearing boxes and all reducers should always be lubricated; especially, lubrication oil level in the bearing box should always be reached the 2/3 of the oil label. 3. Check whether the gap between the cutter and the extrusion die is appropriate. The gap is

No, the silo of Richi Machinery adopts an enlarged gate with an inclined angle of 45° at the conical bottom of the silo, which can increase the cross-sectional area of ​​its bottom and make it difficult to accumulate materials. A vibration device is installed on the outside of the bottom. After the material is prepared,

1. Wet extruders for fish food should be installed in buildings or open shed; environment temperature is 5℃～40℃. 2. Process technology should match the equipments in the extruding line. 3. Working voltage should be stable and deviation is less than ± 5%. 4. Supplied steam pressure and temperature should meet the requirements of the specification.