Equipment
Technology
Technology
The pig feed pellet mill is an essential pelletizing equipment to make pig feed pellets. Richi Machinery is a China professional pig feed pellet production line supplier, this article will introduce the pig feed pellets processing technology in detail.
It is strictly forbidden to start all feed processing machine under load, except for special circumstances that require the approval of the monitor to start the animal feed mixing machine.
The pellets and the magnets on the top must be cleaned once every shift. If they cannot be cleaned, the iron in the feed may enter the animal feed pellet mill ring die and affect the normal operation of the ce animal feed pelletizer machine.
It is very important to control the gap of the pressure roller correctly. If the gap is too small, the pressure roller and the ring die will wear seriously. If the gap is too large, the output will be affected, and even granulation will not be possible.
In order to obtain satisfactory quality pre-mixed feed, in addition to a mixer whose structure and technical parameters meet the technological requirements, reasonable arrangement of the front and rear procedures and reasonable use of the mixer itself are important conditions.
People often regard premix as the heart of compound feed. On the one hand, it plays a key role in compound feed. On the other hand, its components are extremely complex, with many varieties, small quantities, and physical chemistry.
The formula was not checked, and the wrong formula was used.misallocation of large materials causes the work process to be interrupted in the re-weighing link, which affects production efficiency and progress.
First, tripping is caused by a short circuit.The cattle feed crushing machine does not open tripping, but on opening tripping shows that the short circuit is caused by the vibration of the crusher after power on.
"Healthy raising" is to ensure that animals eat well, drink well, live well, and enjoy a healthy in a clean and comfortable environment.
Crushing is a process that uses mechanical methods to overcome the internal cohesive force of solid materials to split them, that is, mechanically break the materials from large pieces into small pieces.
We can control corn moisture, extend cooling time, turn up the level indicator, or slow down the pelleting speed. If we produce 15 ton per hour pig feed with 1:4 ring die, but in order to control the water content, it can be reduced to 13 tons.
From the initial outbreak of African swine plague to the present, African swine fever is still affecting people's livesSo, what is African swine fever?
Please send your requirements, RICHI's consultants will get back to you quickly.
Please specify your requirement by referring to the following aspects，RICHI's consultants will get back to you quickly :