Maintenance and repair of hot sale ce feed superfine grinder:

(1) The main wearing parts of the crusher: flat teeth, round teeth, large and small grinding teeth. Flat teeth and round teeth are made of stainless steel, with good dynamic balance, and should be replaced if they are severely worn. The size of the self-made metal processing should be specifications, and the weight difference of each piece should not be more than 1 gram to avoid vibration damage to the bearing and the machine.

(2) Various sizes of screens of 0.6-12 mm. When replacing, the light side is down.

(3) 베어링은 정기적으로 고속 그리스를 채우고 보름에 한 번씩 점검합니다. 심각한 마모가 발견되면 제때 교체하거나 수리해야 합니다.

(4) Collision is strictly prohibited, and the inside and outside of the machine should be cleaned up for a long time and kept properly to prevent rust.

(5) 제조상의 이유로 정상적으로 작동하지 않을 경우, 사용자는 제조사에 직접 연락하여 무상 보증을 받을 수 있습니다.