Good drinking water hygiene requires a complete set of cleaning and disinfection procedures for the drinking water system. The structure of the waterline is diverse, and their status is constantly changing, which will bring challenges to the sanitation of the waterline. However, we can use daily water quality information and correct cleaning and disinfection methods to resolve these problems. Follow the guidelines below and your poultry will have a first-class drinking water supply.
1. Analyze water quality.
Analyze the mineral content of fouling (calcium, magnesium and manganese). If the water contains more than 90ppm of calcium and magnesium, or contains more than 0.05ppm of manganese, more than 0.3ppm of calcium and more than 0.5ppm of magnesium, then you must include a descaling agent or a certain cleaning agent into your cleaning and disinfection program. The product will dissolve mineral deposits in the waterline and its accessories.
2. Select cleaning and disinfectant.
Scegliere un detergente e disinfettante in grado di sciogliere efficacemente il biofilm o il muco nella linea di galleggiamento. Il prodotto migliore per questa funzione è la soluzione composita di perossido di idrogeno. Prima di utilizzare un detergente e disinfettante ad alta concentrazione, assicurarsi che il tubo di scarico funzioni correttamente per rilasciare il gas accumulato nella conduttura; inoltre, consultare il fornitore dell'apparecchiatura per evitare inutili perdite.
3. Configure cleaning and disinfection solution.
For best results, please use the upper limit recommended on the detergent label. Most dosing devices can only dilute the original liquid to 0.8-1.6%. If you must use a higher concentration, then prepare a cleaning and disinfection solution in a large water tank, and then directly fill the water line without going through the dosing device. For example, if you want to prepare a 3% solution, add 3 parts of the original drug solution to 97 parts of water. The best cleaning and disinfecting solution can be hydrogen peroxide solution.
4. Clean and disinfect the water line.
Sono necessari circa 30-38 litri di soluzione detergente e disinfettante per infondere una linea d'acqua lunga 30 metri e con un diametro di 20 mm. Se un pollaio lungo 150 metri ha due linee d'acqua, è necessario preparare almeno 380 litri di disinfettante. L'estremità della linea d'acqua deve essere dotata di uno scarico, in modo da poterlo aprire dopo la pulizia completa e scaricare completamente la soluzione di pulizia e disinfezione. Per la pulizia e la disinfezione della linea d'acqua, attenersi alla seguente procedura:
(1) Aprire la linea dell'acqua e scaricare completamente l'acqua presente nella tubazione.
(2)Fill the water line with a cleaning and disinfecting solution.
(3)Observe whether the solution flowing from the drain has the characteristics of a disinfectant solution, such as with bubbles.
(4)Once the water line is full of cleaning and disinfection solution, please close the valve; according to the drug manufacturer's recommendation, keep the disinfection solution in the pipeline for more than 24 hours.
(5)After keeping for a period of time, rinse the water line. The flushing water should contain disinfectant and the concentration is the same as that in the daily drinking water of poultry.
(6)After the water line is cleaned, disinfected and rinsed, the incoming water source must be fresh and must be purified (the concentration at the farthest point from the water source is 3-5ppm). If you use the redox potentiometer to check, the reading should be at least 650.
(7)During the empty house, the pipeline from the well to the chicken house should also be thoroughly cleaned and disinfected. It is best not to use water from the pipeline outside the house to flush the pipeline inside the house. Please connect the water pipe to the cannula of the dosing device to back flush the pipeline outside the house.
5. Remove scale.
After the water line is cleaned and disinfected, the scale can be removed with a descaling agent. Hydrogen peroxide is a product that has a descaling effect. When using descaling agents, follow the manufacturer's recommendations.
6. Keep the water line clean.
After cleaning and disinfecting the water line, keeping the water line clean is very important. You should develop a good daily disinfection procedure for poultry. The ideal waterline disinfection procedure should include adding disinfectant and acidulant. Please note that this procedure requires two dosing devices, because the acid and bleach cannot be mixed together when preparing the concentrate. If there is only one dosing device, please add 40 grams of 5% bleach concentrate to the drinking water, the dilution ratio is 7.5 grams of concentrate: 1 liter.
[Notes]
1. Please do not use acidulant as the only method of water treatment, because using acidulant alone can cause bacteria and fungi to grow and proliferate in the waterline.
2. More and more people are using the water-free-stable composite hydrogen peroxide solution as a drinking water disinfectant. There will be no residue. It is a very effective disinfectant and waterline cleaner, and it will not damage the waterline.
3. When we use other drugs or vaccines for poultry, we should stop adding disinfectants to drinking water. Disinfectants can inactivate vaccines and reduce the effectiveness of some drugs. After administration or immunization, disinfectants should be used in drinking water.
4. The sanitation of the water line must meet the requirements of local regulations, please consult the local authority. Always follow the guidelines of the equipment and drug manufacturers.
【More related info about poultry】
4.Precauzioni per la costruzione degli allevamenti di pollame
5.Small scale 1 ton per hour broiler poultry chicken feed pellet making plant machine for sale
8.1-10 Ton per hour poultry chicken cattle feed production line's crushing ingredient process
9.Large poultry cattle feed mill factory euqipmens' installation and maintenance
