The main responsibility of the raw material feeder is to follow the instructions of the microcomputer in the microcomputer (control) room to input the raw materials needed for animal feed plant production into the designated equipment port in a timely, accurate, quality and quantity manner. The operation process and basic rules are as follows:

1. Arrive in advance to prepare. Must arrive at the production site 10 minutes before the scheduled working time. Attend the pre-class meeting carefully, understand and accept the task of feeding accurately; wear work clothes and labor protection equipment according to the regulations; check all the machines and equipment under the management of the post; do all the preparations before the formal feeding.

2. Confirm the warehouse number, instruction and hoist. Before feeding, you must contact the computer (control) room to confirm that the opened raw material warehouse number is correct, and get the feeding instruction of the computer room, and the material can be fed when the hoist is running normally.

3. Opening the bag, quality inspection, and feeding. Except for paper packaging, when unpacking, use scissors or a knife to disconnect the suture line from the corner of the packaging bag, open the bag, and place the untied sealing string in a fixed container. It is strictly forbidden to cut the packaging at will; you must carefully pass the sense before feeding Examine the quality of the raw materials to be invested. Check the color, smell, impurities, moisture, agglomeration, mildew, etc. of the raw materials. If problems are found, they should immediately report to the leader and deal with them strictly. Shake all the raw materials in the packaging bag when feeding, and place the empty bag neatly on the side of the feeding port for easy sorting and bundling; clean up the debris on the feeding site at any time. It is strictly forbidden to throw empty bags, strings and sundries.

4. Select visible debris. When feeding, all sundries and moldy agglomerated materials must be selected immediately to prevent sundries and moldy agglomerates from entering the equipment.

5. Pay attention to refueling and clearing the site. Before changing to another kind of raw material, the feeding site must be cleaned, contact the computer (control) room, and get the feeding instruction before starting to put another kind of raw material.

6. Feeding efficiency requirements. For raw materials with a piece weight of ≥70kg, the feeding amount should be ≥6.0 tons/person hour; for raw materials with a piece weight of 40kg≤<70kg, the feeding amount should be ≥4.5 tons/person hour; for raw materials with a piece weight <40kg, the feeding amount per hour should be as above The quota is determined at discretion.

7. Clean up related equipment regularly. Take care of the equipment (including the feeding gate curtain and fence); regularly clean the dust collector bag and pipe to maintain a good dust removal effect; be responsible for the cleaning of the permanent magnet cylinder in the crushing process; be responsible for regularly removing the scale in the screw and the feeder of the crusher, Windings and other sundries; responsible for the inspection and replacement of the crusher screens and hammers. The replacement of the hammers should try not to occupy production time.

8. Monitoring equipment operation. During the operation, attention should be paid to monitoring the working condition of the shredder, shut down immediately when abnormal sound is heard, and ensure that the operating current of the shredder does not exceed the rated current value of the motor. Pay attention to the operation of other equipment, and report any abnormality to the leader at any time, without any unreasonable delay, and ensure that the managed equipment and various related auxiliary facilities are in good condition during work.

9. Routine get off work after work. Before leaving get off work, clean the feeding site and the responsibility area for sanitation; transfer the raw material packaging bags and strings to the designated location; put the used tools and articles in the restoration place; do a good job in the feeding site and the responsibility area; do A comprehensive inspection of routine get off work before leaving work. Complete the handover procedures as required.

いくつかの一般的な 飼料原料

1. 養鶏飼料原料

エネルギー飼料として、主にトウモロコシ、米ぬか、ふすま、乾燥サツマイモなど、タンパク質飼料として、主に綿餅、野菜餅、大豆餅など、粗飼料として、主にベッチミール、野菜茎粉、トウモロコシ茎粉など、ミネラル飼料として、主に骨粉、卵殻粉、貝殻粉など。配合する場合、上記の各種類の原料をそれぞれ2～3種類から選び、一定の比率で配合し、お互いの栄養素を補う目的を達成する。.

2. 養豚飼料原料

とうもろこし、小麦、大麦、くず米、小麦粉、ふすま、フィッシュミール、大豆ミール、ピーナッツミール、コットンミール、菜種ミール、イーストミール、リン酸水素カルシウム、炭酸カルシウム、食塩、硫酸銅、硫酸第一鉄、硫酸マンガン、ヨウ化カリウム、酸化亜鉛亜セレン酸ナトリウム、塩化コバルト、脂溶性ビタミンA、D、E、K、ビタミンB群、合成リジン、メチオニン、スレオニン、クロム酸、薬剤、昆虫忌避剤、抗真菌剤、酸化防止剤、香味誘引剤、酵素製剤、結合剤など。.

3. 牛飼料原料

ヘイ、ワラ、青飼料、サイレージ、トウモロコシ、ソルガム、大麦、オート麦、米、ふすま、根菜、塊茎、果実、野菜、スラグ、骨粉、卵殻粉、貝殻粉、石粉、炭酸カルシウム、リン酸カルシウム、二塩基性リン酸カルシウム、食塩、硫酸マグネシウム、ビタミンA、D、E、ナイアシン、鉄、亜鉛、銅、マンガン、ヨウ素、コバルト、セレンなど。.

4. 羊用飼料原料

羊エネルギー飼料の主原料はトウモロコシ、ソルガム、大麦などである。タンパク質飼料の主原料：大豆粕、綿花粕、ピーナッツ粕など。ミネラル飼料の主原料：骨粉、塩、重曹など。.

5. 養魚飼料原料

魚用飼料のタンパク質要求量は比較的高いので、原料中のタンパク質原料の割合は高くなる。主な蛋白質原料は、魚粉、大豆粕、ddgs、各種油糧作物の種子を実際に圧搾したものである。また、一般的に飼料に使用される主な原料は、トウモロコシ、小麦ふすま、二次粉、米ぬか等である。.